How long to fit a kitchen?

[Pugwash]

The new wiring is in, they just need to fit sockets, cupboards and floor.

BECAUSE THERE'S NO EMOTICON FOR WHAT i'M FEELING RIGHT NOW!

The 'kers turned up early today, disconnected the cold water, blocked off my fridge, and I have no coffee! d04l1ng

 

[Codbasher]

Fitted mine myself, mates a sparky who worked with me, rather pleased with the end result, and saved 3k on kitchen fitters..............

 

[marcella]

Fitted mine myself, mates a sparky who worked with me, rather pleased with the end result, and saved 3k on kitchen fitters..............

the oldest boys an apprentice sparkie and middle one a chippie, hoho the little feckers can put right all the shit they fooked up over the years:yo:

 

[Codbasher]

the oldest boys an apprentice sparkie and middle one a chippie, hoho the little feckers can put right all the shit they fooked up over the years:yo:

Send em down to me, ?3 an hour to rewire me bedroom and fit laminate flooring...... :yo: :yo:

 

[Jaws]

Did mine myself.. did the gas electric and water plumbing as well as fitted all the cabinets. including stripping the old lot out too me a day and a half.

 

[americanexpress]

The new wiring is in, they just need to fit sockets, cupboards and floor.

BECAUSE THERE'S NO EMOTICON FOR WHAT i'M FEELING RIGHT NOW!

The 'kers turned up early today, disconnected the cold water, blocked off my fridge, and I have no coffee! d04l1ng

... if its any consolation, nor have theysh1tehppns kitchen incomplete since 1984 here (is this a skiving record?)R#?

 

[ianrobbo1]

same as Jaws :bow: done the leccie, plumbing and fitted all the units myself!! I don't see how people struggle to put MFI stuff together, :dunno: and plumbing a couple of taps sink and washer is just as easy!! had the "in law to be" check the trickery prior to me blowing myself up and that was ok too,!! :bow: still got the cornice and pelmets to put on the cupboards, but as it's only been a year theres plenty of time to do that

 

[derek kelly]

same as Jaws :bow: done the leccie, plumbing and fitted all the units myself!! I don't see how people struggle to put MFI stuff together, :dunno: and plumbing a couple of taps sink and washer is just as easy!! had the "in law to be" check the trickery prior to me blowing myself up and that was ok too,!! :bow: still got the cornice and pelmets to put on the cupboards, but as it's only been a year theres plenty of time to do that

Have you fitted the dishwasher yet?

 

[ianrobbo1]

Have you fitted the dishwasher yet?

I refuse to be "fitted" in me own kitchen!! :t

 

[richard]

The new wiring is in, they just need to fit sockets, cupboards and floor.

BECAUSE THERE'S NO EMOTICON FOR WHAT i'M FEELING RIGHT NOW!

The 'kers turned up early today, disconnected the cold water, blocked off my fridge, and I have no coffee! d04l1ng

Pop in you are only round the corner kettle is allways on.


R8ree!

 

[stan the man]

and saved 3k on kitchen fitters..............

fookin'hell si,how big is your kitchen mate....size of buck palace or wot.like jaws i do it all with the exeption of gas(not corgi registered)and electrickery .an average kitchen takes approx 3 days...from ripping out old one to finished job including everything.here's one i done for a mate last year

 

[Wolfie]

who is the shrine for????

 

[stan the man]

who is the shrine for????

dunno andy...i'll have to ask the lady of the house....NOT

 

[Wolfie]

burnt offerings????

 

[Codbasher]

fookin'hell si,how big is your kitchen mate....size of buck palace or wot.like jaws i do it all with the exeption of gas(not corgi registered)and electrickery .an average kitchen takes approx 3 days...from ripping out old one to finished job including everything.here's one i done for a mate last year

Stan,

Had to do mine top to bottom.

New Ceiling, floors, total re wire, plastering etc, re plumbing as moved Sink etc..

Saved ourselves apx 3k from having the pros doing it. Biggest cost was having to get a pro in to do the joints on the work tops he also cut the holes for the hob and sink, did not trust myself to do the joints with a jig and router.

First time I have ever done something like it, well pleased with the finish..

 

[stan the man]

burnt offerings????

quite possibly...most definately if it was my house

 

[stan the man]

Stan,

Had to do mine top to bottom.

New Ceiling, floors, total re wire, plastering etc, re plumbing as moved Sink etc..

Saved ourselves apx 3k from having the pros doing it. Biggest cost was having to get a pro in to do the joints on the work tops he also cut the holes for the hob and sink, did not trust myself to do the joints with a jig and router.

First time I have ever done something like it, well pleased with the finish..

great sense of satisfaction when you do it all yerself ain't it.....



































plus all the dosh you saved you can then spend on the bird :yo: